3/29/2012

Best Buy Mitutoyo 500-722-10 ABSOLUTE Coolant Proof Digital Caliper, IP67, LCD, Battery Powered, Metric, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution, Carbide-Tipped Jaws For ID Measurement Shop

Mitutoyo 500-722-10 ABSOLUTE Coolant Proof Digital Caliper, IP67, LCD, Battery Powered, Metric, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution, Carbide-Tipped Jaws For ID Measurement Specification

  • Lightweight, hardened stainless steel construction for protection of caliper and ABSOLUTE linear encoder technology components
  • Four-way measurement capability with carbide-tipped jaws for precision inside (ID) measurements
  • Function control buttons on caliper face for ease of access: Origin, On/Off, and Zero/ABS (Absolute Scale)
  • Meets IP67 for protection against dust and temporary submersion in water
  • Large, digital, single-value readout LCD display for readability

Mitutoyo 500-722-10 ABSOLUTE Coolant Proof Digital Caliper, IP67, LCD, Battery Powered, Metric, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution, Carbide-Tipped Jaws For ID Measurement Overview

The Mitutoyo 500-722-10 ABSOLUTE Coolant Proof Caliper is a dust and water resistant digital caliper made of durable hardened stainless steel using Mitutoyo’s ABSOLUTE linear encoder technology. This caliper conforms to IP67 protection levels enabling it to operate in workshop conditions exposed to water, dust, coolant, or oils.

This digital caliper has accessible function control buttons, such as Origin to set and retain the original measuring point, On/Off to automatically shut off the caliper after 30 minutes, and Zero/ABS (Absolute Scale) to zero-set the LCD display. It uses the metric measuring system.

Although identical to dial and vernier calipers in its ability to make precise measurements, the digital caliper has an LCD which increases reading reliability. 500-722-10’s LCD also reflects all ABSOLUTE system activities. The Absolute Scale (ABS) function tracks the set origin point, even after shutoff. Once on again, the caliper can immediately start measuring, without zero resetting. The LCD can be "zeroed out" before making and comparing incremental measurements without having to subtract the first measurement from the second.

The 500-722-10 has the ABSOLUTE electromagnetic induction linear encoder. It weighs 198 g and measures outer diameter (OD), inner diameter (ID), depth, and step, where the butt end of the fixed jaw measures one end of a work piece before its upper/lower or inner/outer "steps" are measured. Model 500-722-10 has carbide-tipped jaws for ID measurements. Outside jaw depth is 50 mm, inside jaw length is 24.5 mm, inside jaw depth is 20 mm, and beam width is 16 mm. Range is 0 to 200 mm, LCD resolution is 0.01 mm, repeatability is 0.0005”/0.01 mm, and accuracy is rated + or - 0.02 mm. Dust/water protection level is IP67. An alarm alerts the user to low voltage and counting value composition errors. A rolling thumbwheel makes fine adjustments and a thumbscrew locks the scale’s position. Response speed is unlimited. The caliper has Statistical Process Control (SPC) data output capability; it outputs data using a serial data interface to a computer or other dedicated recording device using SPC cable with data switch (05CZA624 or 05CZA625, depending on cable length). The SR44 silver oxide cell battery (938882) lasts approximately 3 years with normal use.

Calipers measure the distance between two opposing sides of an object. They make inside, outside, depth, or step measurements, according to their type. Calipers are commonly used in architecture, metalworking, mechanical engineering, machining, manufacturing, carpentry, and medicine. The simplest calipers have two legs to mark the two points and require a ruler to take the measurement. More complex calipers use two sets of jaws instead of legs and have up to two graduated scales. Vernier, dial, and digital calipers all give direct and accurate readings and are functionally identical, having a calibrated scale with a fixed jaw and another jaw with a movable pointer that slides along the scale. The vernier caliper has a scale sliding parallel to the main scale for an additional, fractional reading to improve measurement precision. The dial caliper has a circular dial with a pointer on a toothed gear rack replacing the second vernier scale. As with the vernier, this second measurement is added to the reading from the main scale to obtain the result. The dial caliper is used for measuring size differential between two objects, as well. The digital caliper takes the same sort of differential measurements as the dial caliper by zeroing the display at any point along the slide, with an LCD (replacing the dial) that displays a single, easily read value in both English and metric units. Some digital calipers can hold data readings between measurements and send them to data collection devices.

Mitutoyo manufactures precision measuring tools, metrology equipment, and systems. The company was founded in Tokyo in 1934 and formed Mitutoyo America Corporation in 1963, which is headquartered in Aurora, IL.

What’s in the Box?

  • Mitutoyo 500-722-10 Digital Caliper
  • Fitted, plastic case

  

you looking for low priced Mitutoyo 500-722-10 ABSOLUTE Coolant Proof Digital Caliper, IP67, LCD, Battery Powered, Metric, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution, Carbide-Tipped Jaws For ID Measurement?

before decision to buy, I searches on online so long time. So I gathered a web store that sells Mitutoyo 500-722-10 ABSOLUTE Coolant Proof Digital Caliper, IP67, LCD, Battery Powered, Metric, 0-200mm Range, +/-0.02mm Accuracy, SPC, 0.01mm Resolution, Carbide-Tipped Jaws For ID Measurement and compare prices to. Some stores offers me fast shipping.

Now the prices down even more urgent look at all the other check prices before the end of time.

This website is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com

0 comments:

Blog Archive